Why can the Horrol brand sole cleaning machine be unique at the entrance? We first observe the structure of Horrol sole cleaning machine, the automatic sole cleaning machine consists of: 304 stainless steel sheet metal, equipment operation motor, integrated controller, Radar Microwave Sensor, water level sensor, DC high-pressure water pump, flushing water inlet solenoid valve, synchronous belt brush, stainless steel transmission shaft, bearing gear chain, stainless steel support rib, synchronous belt support transmission ball, bearing fixed aluminum block, coral velvet super absorbent pad, height adjustment horseshoe feet, etc. The structure of Horrol brand clean room sole cleaning machine is not only convenient for maintenance, but also reduces the cost of later maintenance.

The sheet metal of Horrol brand automatic sole cleaning machine is made of 1.5mm thick stainless steel sheet metal frame, and all parts are made of 304 brushed stainless steel plate through laser cutting, bending machine bending, argon arc welding, laser welding, and oil film drawing. Through years of experience in design innovation, the surface of the Horrol brand sole cleaning machine equipment is integrated into a structure, and the seamless connection between the sheet metal blocks has been realized. There is no obvious phenomenon of uneven welding of argon arc welding butt to each fragmented sheet metal on the surface. At present, the sheet metal of Horrol sole shoe washing machine adopts the opening of the upper maintenance part, which simplifies the maintenance procedure of problems in the later stage, makes the maintenance more convenient and fast, and reduces the maintenance labor cost and time. The rest of the market is made of stainless steel pipes and stainless steel plates by simple argon arc welding. What's more, it is made of 201 stainless steel or plastic, which greatly shortens the service life of the equipment for frequent and long-term industrial use.

The integrated controller is the 'brain' of the automatic sole cleaning machine, for the vital core components, Horrol Technology uses its strong advantages in the SMT industry to achieve self-sufficiency from development, patching, manufacturing, burning, and testing, and the key operation setting is stable and reliable, and can switch between manual mode and automatic mode with one key, all electronic components are integrated into a box through the port, and the microwave induction control motor operation of the sole cleaning machine, high and low water level detection, manual automatic water change, All actions such as leakage safety protection are controlled by the integrated controller, and the equipment has its own alarm function, and there will be sound and light alarms in case of failure or low water level and water shortage. Other companies in the market use a non-functional touch screen or relay separation to control the operation of the equipment, which leads to the problem of the failure of the operation of the sole shoe washing machine or the complexity of the control system, which is difficult to maintain and the cost of replacing the control system is high.

The scrubbing area of Horrol brand sole cleaning machine adopts T5 toothed synchronous belt brush, which is closely engaged with the stainless steel main drive shaft. The belt brush is made of imported polyurethane new material through the self-developed mold, sewn by the computer car, in order to be more durable, the shoe washing machine belt brush is sewn with Bang Di thread. At present, Horrol synchronous belt brushes have achieved large-scale, belt molding, seamless seamless docking, imported nylon brush planting, belt and brush sewing one-stop production, no matter what specifications and lengths of belt brushes in the market can achieve high-efficiency customized production. Other sole cleaning machines on the market are made of ordinary smooth belt bonding or toothless conveyor belt sewing, and more unscrupulous businesses use recycled materials to manufacture belt brushes in order to reduce costs, which has many problems of hair removal, breakage, glue opening and fragility encountered by many customers.

In order to ensure that the water exchange system of the automatic sole cleaning machine works for a long time, with high efficiency and high load, the sewage system of Horrol brand sole cleaning machine has professionally developed a DC high-pressure sewage pump. The head of the DC high-pressure sewage pump reaches 15 meters, the power reaches 90 watts, and it comes with a four-point inlet and outlet to facilitate the docking of water pipes, and the sewage pipe wheel can be walked flat, down or through the ceiling, and the DC voltage of 24V also ensures the safety of the shoe washing machine. Other fish tank pumps with low power of 2~3 meters of head or 220V separated high-power large water pumps on the market are used, which are easy to block the fan blades due to insufficient power and the drainage pipeline can only go flat or down. 220V is separated from the equipment or a large-volume sewage pump, which takes up a lot of space, and the water exchange is not clean and smelly, and the maintenance cost is extremely high.

In order to better control the water exchange, Horrol has independently developed a non-contact liquid level sensor for rubber block fixation, and the water inlet solenoid valve adopts a four-point interface pulse flush valve. The water level sensor is composed of a non-contact liquid level device and a waterproof and easy-to-fix rubber block, which is more sensitive and easy to adjust. As long as there is water in the water inlet pipe, it can basically be controlled by the controller and water level sensor for water replenishment. While other sensors such as floats and probes and large water inlet valves are used in the market, there is instability, overflow, misjudgment, and poor water inlet encountered by customers, and the power consumption is greater and the power is wasted.

The main engine operation control sensor of Horrol brand sole cleaning machine adopts the world's most stable and error-free radar microwave sensor, which is sensitive, as long as there are moving personnel through it, it can be inducted to work, and the microwave sensor is stable and durable, with a long life, and there will be almost no problems after several years of use. The market other uses infrared induction, infrared induction is prone to misjudgment and insensitive induction, there are often white reflections, black light absorption caused by misjudgment or not working, and infrared sensors are prone to damage, although the cost is low, but the later maintenance cost has been greatly improved.

The absorbent pad in the suction area configured by Horrol brand automatic sole shoe washing machine is made of multi-layer composite strong absorbent coral velvet material absorbent pad, and the absorbent pad of the shoe washing machine is made of stitching, with its own anti-slip glue particles, which can be directly placed on the leakage plate of the sole cleaning machine, and then scrubbed by the shoe cleaning machine shoe washing machine, and the remaining water on the sole can be instantly absorbed by stepping on the absorbent pad. The composite coral velvet absorbent pad can be washed and machine washed and used repeatedly without shedding, with good water absorption efficiency and saving the cost of frequent replacement. The other sponge fabrics in the market are made of poor quality and easy to lose hair, or the ugly PVA that is cut is used as an absorbent pad, and the absorbent pad of this material will cause secondary pollution due to hair loss and damage, and it is not durable and needs to be replaced frequently, especially the PVA material is not only ugly, but also stiff and curled after drying.

The transmission parts of Horrol brand automatic sole cleaning machine are made of stainless steel core, which is not rusty, durable and does not break, and the outer layer of the main drive shaft is wrapped with T5 toothed Teflon rubber ring with wear-resistant bite and good occlusion. The other materials in the market are made of carbon steel or other materials, which are prone to rust, corrosion or fracture in the short term, and it is difficult to disassemble and replace them after long-term use of rust, which greatly increases the maintenance cost.