L-type fully automatic loader
—
The L-type full-automatic plate collector produced by Horrol Technology is applied to the plate collection of the smt production line. It has the characteristics of small area saving, no interference from the front out frame, stable and controllable electric plate pushing. The design with a length of less than one meter can meet the requirements of almost all chip production sites. Therefore, the L-type automatic loader is also called a small full-automatic plate unloading machine.
【Case presentation】
—
Electric push plate, front access frame
L-type fully automatic loader
Horrol Technology
L-type fully automatic loader
Horrol Technology
L-type fully automatic loader
Horrol Technology
L-type fully automatic loader
Horrol Technology
Small fully automatic loader
Horrol Technology
Small fully automatic loader
Horrol Technology
Small fully automatic loader
Horrol Technology
Small fully automatic loader
Horrol Technology
Corner SMT board splicing machine
Horrol Technology
Corner SMT board splicing machine
Horrol Technology
Corner SMT board splicing machine
Horrol Technology
Corner SMT board splicing machine
Horrol Technology
Small stacker
Horrol Technology
Small stacker
Horrol Technology
Small stacker
Horrol Technology
Small stacker
Horrol Technology
Technical parameter comparison Of L-type automatic Loader
—
| Equipment model | HR-AL-L250 | HR-AL-L330 | HR-AL-L390 | HR-AL-L460 |
| Controller | PLC | PLC | PLC | PLC |
| Overall dimensions | 930x1000x1400mm | 1130x1080x1400mm | 1430x1140x1400mm | 1430x1210x1400mm |
| Frame up time | about3s | about3s | about3s | about3s |
| Material box replacement time | about5s | about5s | about5s | about5s |
| Power supply and load | 220v/0.3kw | 220v/0.3kw | 220v/0.3kw | 220v/0.3kw |
| Air pressure and flow rate | 4-6bar，≤10L/min | 4-6bar，≤10L/min | 4-6bar，≤10L/min | 4-6bar，≤10L/min |
| Orbit hight | 900±20mm | 900±20mm | 900±20mm | 900±20mm |
| Transport Direction | Left⇆Right | Left⇆Right | Left⇆Right | Left⇆Right |
| Allowable plate thickness | 0.4-5mm | 0.4-5mm | 0.4-5mm | 0.4-5mm |
| Allowable part height | ≤2.5cm | ≤2.5cm | ≤2.5cm | ≤2.5cm |
| Step selection | 1-4（10mm step） | 1-4（10mm step） | 1-4（10mm step） | 1-4（10mm step） |
| Sensor | Photoelectric induction | Photoelectric induction | Photoelectric induction | Photoelectric induction |
| Adjusting the track | Handwheel adjustment | Handwheel adjustment | Handwheel adjustment | Handwheel adjustment |
| Material frame size | 355x320x563mm | 460x400x563mm | 535x460x570mm | 535x530x570mm |
| Fault detect | I/O | I/O | I/O | I/O |
| Allowable board size | （50x50）x（350x250）mm | （50x50）x（455x330）mm | （50x50）x（530x390）mm | （50x50）x（530x460）mm |
| Equipment weight | 150kg | 175kg | 215kg | 240kg |
The above parameters are for reference only. If you need customization, please consult sales.
繁体中文
English
中文
