Horrol Technology's new generation of fully automatic sole cleaning machines has made major reforms and innovations in terms of structural design, accessory function design, and sheet metal accessory manufacturing. In this article, Haiyan Ruiyu will take you to learn how to replace and install the belt brush of the fully automatic sole cleaning machine. Many fully automatic sole cleaning machines on the market are troublesome to replace the belt brush and other maintenance, but Horrol Technology's fully automatic cleaning machine can easily replace the belt brush of the shoe washing machine for daily maintenance.

After years of historical accumulation, Horrol Technology's fully automatic sole cleaning machine has undergone a revolutionary upgrade. Through the accumulated customer experience and installation and maintenance experience, Horrol Technology has absorbed the essence and removed the dross, and made more humanized design improvements to the appearance and interior of the fully automatic sole cleaning machine. The appearance manufacturing process of the sole washing machine has been unprecedentedly improved, and the internal components of the product have been subversively upgraded.

Horrol Technology's fully automatic sole cleaning machine has a humanized design for its appearance and convenient later maintenance. Horrol Technology has redesigned the sole cleaning machine. The sheet metal of the sole cleaning machine is made entirely of 304 stainless steel sheet metal, abandoning the original welding process that combines stainless steel pipes and stainless steel sheet metal bodies. The purpose of this trip is to ensure the overall flatness and non-depression beauty of the sole cleaning machine. After seamless welding, the sheet metal of the industrial cleaning machine is surface treated by ink drawing technology. Where holes need to be opened on the sheet metal surface of the fully automatic sole cleaning machine of Guangdong Horrol Technology Co., Ltd., detachable parts are left. In later maintenance, the replacement parts that need maintenance can be disassembled and installed without flipping the equipment.

Horrol Technology's fully automatic sole cleaning machine water changing system The sink and drainage part of the sole cleaning machine are the most concerned parts of all sole cleaning machine manufacturers. In order to better drain water and reduce the damage to the sewage pump, various "gods" have shown their magical powers. After years of accumulation and precipitation, Horrol Technology has once again made subversive innovative improvements to the water changing part. The sink of the sole cleaning machine adopts an inclined funnel shape, and the water outlet holes are arranged by tap water for flushing water intake. In order to significantly reduce the probability of the sewage pump of the sole washing machine being blocked and damaged by dirty particles, Horrol Technology's new generation of fully automatic sole cleaning machines has made major improvements.

Before the sewage reaches the sewage pump, the drying area and shoe washing and scrubbing area of ​​the Horrol Technology fully automatic sole cleaning machine are equipped with strong filter cotton near the end of the inclined water tank. The sewage is filtered before it reaches the water pump, which greatly filters the granular components of mud and dirt in the sewage. Through the measures such as the tilted funnel-shaped water tank of the sole cleaning machine, the arrangement of water pipe holes for water inlet and flushing, and the strong filter cotton filtering sewage, the sewage discharge and water exchange system can effectively change the water of the equipment, and greatly improve the service life of the sole cleaning machine water exchange system, which also helps to improve the service life of the shoe washing machine belt brush to a certain extent.

Horrol Technology Industrial Shoe Washing Machine Strong Absorbent Cotton Pad Horrol Technology Fully Automatic Shoe Cleaning Machine uses strong absorbent pads in the suction position. The cleaning machine absorbent pads are made of two-centimeter-thick coral fleece and absorbent cotton. Guangdong Heisenberg Technology Co., Ltd. shoe washing machine absorbent pads are compounded by computer sewing and locking. Cotton fleece meets the powerful advantages of strong water absorption, no hair loss, non-slip, and machine washable. The shoe washing machine absorbent pad uses this kind of absorbent pad cotton, which is as soft as fat, just like a small absorbent motor that absorbs water instantly. The cleaning machine absorbent pad has a plastic non-slip bottom, which is naturally non-slip without gluing.

The filter plate in the cleaning area and drying area of ​​the sole cleaning machine of Horrol Technology adopts an indentation bending design and can be directly lifted up and tilted without support. This design is not only safe but also convenient for cleaning the sink of the sole cleaning machine. The indentation bending design of the filter plate prevents injuries caused by people accidentally kicking the stainless steel plate. The filter plate of the sole cleaning machine is made of a whole piece of sheet metal and can be tilted without support, which is convenient for cleaning personnel to check and clean the inside of the sink and avoids possible beating injuries to the staff caused by the support rod slipping.

Horrol Technology fully automatic sole cleaning machine stainless steel drive shaft The drive shaft of the fully automatic sole cleaning machine adopts a stainless steel inner core that is rust-proof, strong and wear-resistant, and adopts an open design at the chain drive assembly part. The drive assembly part adopts an open design, which greatly reduces the manpower time for later maintenance. Without turning over the equipment, the chain locking ear bearing and other components can be disassembled to replace and maintain the drive shaft, bearings, chains, etc.

Horrol Technology sole cleaning machine auxiliary drive shaft and locking screws Horrol Technology fully automatic sole cleaning machine belt brush replacement is easier in the later stage, only need to remove the four long screws in the sink to replace the belt brush of the shoe washing machine. Open the filter plate in the drying area, you can see the internal structure of the sink. The filter plate of the old sole cleaning machine has a support rod, and the new sole cleaning machine has no support rod. After the filter plate is lifted, it can support itself according to its complete structure and gravity, which is convenient for disassembly and installation of the screws in the sink. 

Horrol Technology Shoe Cleaning Machine Sink Filter Cotton and Locking Long Screws On the left and right sides of the sink, you can see two locked long hexagon socket screws on each support rod. These four hexagon socket screws can be adjusted according to the needs. When changing the belt brush, the four screws must be removed. After removing the long hexagon socket screws, the secondary transmission shaft at this position can be lifted. The secondary transmission shaft is a stainless steel smooth shaft with an aluminum block with self-aligning bearings at both ends. 

Horrol Technology sole cleaning machine fixed aluminum block and self-aligning bearing drive shaft The main drive shaft of the sole cleaning machine is fixed by a fixed aluminum block and an ear bearing. The main drive shaft is a toothed stainless steel drive shaft wrapped with Teflon material. On the side of the slot of the main drive shaft fixed aluminum block, there is usually a small screw to lock it and remove it. If there is no screw, ignore it. When the secondary drive shaft and the belt brush on the sink side are lifted, the fixed aluminum block end of the main drive shaft can be lifted at this time. If the fixed aluminum block end of the main drive shaft can be lifted at this step, the belt brush that needs to be replaced can be removed, and the intact belt brush can be replaced through one end.