Sole cleaning machine large and small circuit boards and finished control boxes

Key 1: Set the motor rotation time for cleaning the sole (the belt brush rotates each time for 1-60 seconds). Press and hold key 1 for 3 seconds and the light flashes and a beep sounds. Press key 5 to reset and enter the setting state (press key 1 once to set it to one second, press key 1 twice to set it to two seconds, and so on). Press and hold key 1 for 3 seconds and the light goes out and a beep sounds. The setting is successful.

Key 2: Set the interval time for sewage discharge (1-30 minutes). Press and hold the No. 2 key for 3 seconds and the light will flash and beep. Press the No. 5 key once to reset and enter the setting state (press the No. 2 key once to set it to one minute, press the No. 2 key twice to set it to two minutes, and so on). Press and hold the No. 2 key for 3 seconds again and the light will go out and beep to exit. The setting is successful. One minute is about 60 people.

Button 3: Set the water shortage timeout alarm time (1-10 minutes), press and hold for 3 seconds to enter the setting, and press and hold for 3 seconds again to exit.

Key 4: Set the single sewage pump working time (1-30 minutes). Press and hold key 4 for 3 seconds and the light will flash and beep. Press key 5 to reset and enter the setting state (press key 4 once to set it to one minute, press key 4 twice to set it to two minutes, and so on). Press and hold key 4 for 3 seconds again and the light will go out and beep to exit the setting successfully.

Button 5: Press once and the light will turn on to enter automatic water filling and drainage mode.

Button 6: Press once and the light will turn on for manual sewage discharge mode.

Sole cleaning machine water changing system control port

Sole cleaning machine working control port

Main circuit board and function button setting module of the sole cleaning machine

Each port of the integrated control module of Horrol Technology's fully automatic sole cleaning machine has its own function. The ports and functions are marked with serial numbers. It is suitable for the work control of almost all sole cleaning machines on the market. The clear circuit board markings make it easier to maintain in the future and the setting functions are simple. Before leaving the factory, Horrol Technology has set the circuit board and made reasonable settings for working hours, water changes and other functions based on the usage of most customers. You can use Horrol Technology's sole cleaning machine controller as soon as you get it.